Seauto Cordless Robotic Pool Vacuum
- Regular price
- $666.99
- Regular price
-
$0.00 - Sale price
- $666.99
- Unit price
- per
Shipping in
Sku : 14:173#Sky Blue;200007763:201336099
Couldn't load pickup availability
Specifications at a glance
| Brand and model | Seauto SAT20 Pro cordless robotic pool cleaner |
|---|---|
| Power source | Rechargeable battery; cordless operation |
| Motor | 180W brushless motor with a dual-motor drive system |
| Flow rate | 4800 GPH |
| Battery capacity | 7800mAh |
| Runtime | Up to 150 minutes per cleaning cycle |
| Charge time | Approximately 2.5 hours |
| Maximum pool area | Up to 2,150 sq ft (200 m²) |
| Supported water depth | 1.6–16.4 ft (0.5–5 m) |
| Filter density | 300 μm |
| Pool water range | pH 7.0–7.8 |
| Cleaning areas | Pool floor, walls and waterline |
| Navigation | Track drive, sonar-assisted route planning and automatic low-battery docking |
| Debris pickup | Leaves, algae, small stones, pollen and settled soil. Pickup performance depends on debris size, the pool surface and filter condition. |
| Live choices | Sky Blue or Dark Blue; ships from Australia |
| Country of origin | China |
A cordless pool cleaner for less hands-on scrubbing
Leaves on the floor, fine dirt near the walls and marks around the waterline can turn a quick pool tidy-up into a long job. The Seauto SAT20 Pro is designed to handle the routine cleaning pass for you. Charge it, select the required mode, place it in the pool as directed, and let its tracked drive move across the floor and climb suitable walls.
The 180W brushless drive, dual-brush system and fine filter basket are aimed at full-pool cleaning rather than a floor-only sweep. That makes this model worth considering for a larger residential pool where a small flat-bottom cleaner would leave the walls for you to scrub.
It is cordless, so there is no floating power cable to untangle while it works. You still need to empty and rinse the filter after cleaning, recharge the battery in a dry location, and check that your pool shape and surface match the supplied instructions.
Will it suit your pool?
Pool size
Designed for pools up to 2,150 sq ft (200 m²). Measure the complete floor area rather than relying only on pool length, especially if you have a wide shallow end or an irregular layout.
Pool shape
Suitable for round, rectangular, kidney-shaped and irregular pools. Sharp corners, narrow ledges, steps and steep transitions may still need occasional manual attention.
Surface
Works across concrete, vinyl, fibreglass and ceramic-tile pools. Check the manual before using wall mode on delicate liners, heavily textured finishes or very smooth walls.
In-ground or above-ground
A practical choice for in-ground pools and compatible flat-bottom above-ground pools. Above-ground wall construction varies, so check the manual before activating wall mode.
How the cleaning system works
- Brushless drive: the dual-motor system provides steady movement and suction through the cleaning cycle.
- Dual brushes: two contact points agitate dirt before the vacuum flow draws it into the filter basket.
- Tracked movement: the wide track drive is intended to improve grip on slopes, walls and floor-to-wall transitions.
- Wall cleaning: the cleaner is shown travelling vertically so it can address areas a floor-only robot misses.
- Easy-access filter: remove the basket, empty debris and rinse it with clean water after the cycle.
Navigation and cleaning modes
Sonar-assisted navigation helps the cleaner follow a more organised route instead of relying on random movement. Choose a complete automatic cycle for regular maintenance or use a targeted floor or wall mode when one area needs extra attention.
Battery, runtime and charging
The 7800mAh rechargeable battery provides up to 150 minutes of cordless cleaning, giving the robot time to cover a large residential pool without a floating power cable. Allow approximately 2.5 hours for charging between cycles.
- Charge the cleaner only in a dry, ventilated place and use the supplied charger.
- Dry the charging point before connecting power.
- Do not leave the unit stored empty for long periods; follow the manual’s battery-storage instructions.
- Cycle length can vary with cleaning mode, wall climbing, water conditions and battery age.
Setup, retrieval and filter care
- Fully charge the cleaner in a dry location, then inspect the filter basket and tracks.
- Choose the required cleaning mode and complete the phone connection beside the pool before placing the cleaner in the water.
- Lower the unit into the pool as the manual directs. Let trapped air escape before starting the cycle.
- Keep swimmers out of the pool while the cleaner is operating.
- When the cycle ends, use the supplied retrieval hook where required. Do not pull the cleaner out by a charging lead.
- Open the top, remove the filter basket, empty debris and rinse the basket with clean water. Allow parts to dry before storage.
What comes in the box
Everything needed for normal setup and maintenance is grouped into one package. Check each item when your order arrives so you can charge, operate, retrieve and clean the robot correctly.
Frequently asked questions
Is the Seauto SAT20 Pro suitable for an in-ground pool?
Yes. It is designed for in-ground pools up to 2,150 sq ft (200 m²). Check your measured pool area, depth, wall finish and any sharp ledges against the included manual.
Can it be used in an above-ground pool?
It can be used in compatible flat-bottom above-ground pools. Because wall construction and liners vary, check the included manual before using wall mode.
Does it clean the floor, walls and waterline?
Yes. Select the appropriate mode for floor cleaning, wall climbing or waterline scrubbing. Steps, tight corners and unusual transitions may still need occasional spot cleaning.
How long does it run?
It provides up to 150 minutes of cleaning per charge. The actual cycle length can vary with the selected mode, wall climbing, water conditions and battery age.
How long does charging take?
Allow approximately 2.5 hours for a full charge. Charge the unit in a dry, ventilated place and follow the battery instructions in the included manual.
Does the app work while the cleaner is underwater?
Set up the phone connection and choose the cleaning mode before submerging the cleaner. Wireless communication is limited underwater, so live control may not be available once the cycle begins.
What debris can it collect?
The cleaner can collect leaves, pollen, settled soil, small stones and loose algae. Very fine suspended material may still need the pool’s normal filtration system or separate water treatment.
What should I do after each cleaning cycle?
Remove the cleaner safely, empty and rinse the filter basket, check the brushes and tracks for trapped debris, and let the unit dry away from direct sun before charging or storage.
What is shown in the box?
The package includes the robotic cleaner, charger, user manual, filter basket and retrieval hook. Check the delivered packing list and contact Toys4us promptly if an item is missing.
Which colour can I choose?
The live product selector currently lists Sky Blue and Dark Blue, both shipping from Australia. Check the selected colour shown near the Add to Cart button before checkout.
Ready to spend less time brushing the pool?
Choose Sky Blue or Dark Blue in the product options above, review the selected colour and shipping details, then add the cleaner to your cart.